To Write Measurement Results To A "Memory Stick Duo - Eclipse AVX5000 Owner's Manual

How to operate the optional 5.1ch decoder & AV selector unit
Adjusting sound quality
● Touch

To write measurement results to a "Memory Stick Duo"

Insert the "Memory Stick Duo".
Press and hold the
switch until you hear a beep.
● After touching the switch, a 10-second
count down begins. Leave the vehicle
during that time.
● Pink noise will be outputted from the
speakers and measurement of the
frequency characteristics will start.
● When measurement is complete, the
measurement results of the front
channel will appear on the display.
● Measurements can be written to a
"Memory Stick Duo" and corrected
automatically using E-iSERV web site.
● Touch
measurement.
Slight errors may occur in the measurement data under some circumstances when
this function is used. In addition, it is not equivalent to the precise measurements
that can be made by professional measuring devices.
●Close all doors and windows while measurement is in progress.
●Sound quality data is written to "Memory Stick Duo" as follows.
●The folders and files that are required for E-iSERV sound effect customizations
are created automatically when the data is written to the "Memory Stick Duo".
●Select a file in
(web site).
182
STOP
to cancel measurement.
Measure
STOP
to cancel
MSFTEN SOUND
MSFTEN
SOUND
105*000.ftn
File extension
Three digit number
Adjustment mode
when uploading sound quality data to the E-iSERV