Table of Contents
Advertisement
How to operate the optional 5.1ch decoder & AV selector unit
Adjusting sound quality
Setting the balance
The left/right/front/rear balance can be adjusted so that sound from all speakers arrives at the
listener's ears at the same time.
FAD/BAL
Touch
setting screen to display the
volume balance adjustment
screen.
Touch
● The adjustment level can be set to one
of 15 levels between F (front) and R
(rear).
● The adjustment level can be set to one
of 15 levels between L (left) and R
(right).
● Touch
balance to the center position.
● Touch
The set volume balance will be saved
and the system will return to the
previous operation screen.
● To set the position again, touch
and repeat the steps above.
●If the balance has been set (to a setting other CENTER), the positioning selector
setting will be cancelled (previous page).
●Touch and hold
values continuously. Adjustment will lock when it reaches the center value, and
184
in the POSITION
,
,
or
CENTER
to set the volume
BACK
after making settings.
,
,
,
or
.
POS
,
or
while making fine adjustments to adjust
must be touched again to continue adjustment.
Advertisement
Table of Contents
