Selecting A Peq Pattern From Memory; Measuring/Displaying Frequency Characteristics; Memory Stick Duo - Eclipse AVX5000 Owner's Manual

Selecting a PEQ pattern from memory

Touch to
1
● The preset pattern stored in memory
will be retrieved.
BACK
● Touch
The PEQ mode adjustments will be
saved and system will return to the
previous operation screen.

Measuring/Displaying frequency characteristics

Frequency characteristics inside the vehicle can be measured and displayed on the display.
The measurement result can be referred to when adjusting parametric equalizer. This is also
necessary to automatically correct parametric equalizer setting using E-iSERV sound effect
customizations.
Connect the accessory
microphone with an optional 5.1ch
decoder & AV selector unit.
● Align the microphone with the actual
ear position and attach it to the
headrest or another appropriate fixture.
(Attach the microphone using tape or
string.)
To avoid writing measurement results to the "Memory Stick Duo"
Touch
Measure
second.
● After touching the switch, a 10-second
count down begins. Leave the vehicle
during that time.
● Pink noise will be outputted from the
speakers and measurement of the
frequency characteristics will start.
● When measurement is complete, the
measurement results of the front
channel will appear on the display.
.
5
after making settings.
for less than 1
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
181