Eclipse AVX5000 Owner's Manual page 181

How to operate the optional 5.1ch decoder & AV selector unit
Adjusting sound quality
Touch
Q
pattern.
● Each time this switch is touched, Q
curve pattern will be changed in the
following order shown below.
SHARP
Repeat the operations in step
to change the setting for each
channel and band.
Press and hold the switch you want
to use to save (
you hear a beep.
● Save the PEQ setting so they can be
used for other settings.
● Touch
The PEQ mode adjustments will be
saved and system will return to the
previous operation screen.
180
to select the Q curve
MIDDLE NORMAL
SHARP
to
1 5
BACK
after making settings.
MIDDLE
SLOW
to
) until
SLOW