AVN2454 6.5" Wide TFT Touch-Panel Display 6.5" Wide TFT Touch-Panel Display CD/DVD Multi-Source Receiver with DVD NAVIGATION CD/DVD Multi-Source Receiver with DVD NAVIGATION Reference Guide We appreciate your purchase of this product. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
Read the following prior to using this device For the safe usage of this device The symbols described below are found in this instruction manual as well as on the device itself to insure its proper and safe usage and to prevent injury or damage to property.
Read the following prior to using this device Safety precautions • This device was made for vehicles equipped with a 12V battery. Do not use in a large truck, cold area vehicle or any other vehicle that uses a 24V battery. Otherwise, fires may result.
Page 4
Read the following prior to using this device Safety precautions • This device can be used when the engine switch is either at ON or ACC, however, to avoid depleting the battery, operate it with the engine running. • This product must be operated only as on-board equipment, or it may cause Caution electrical shock or injury.
Page 5
• Inoperable switches will fade and be disabled while driving. Touching inoperable switches while driving will display a message on the screen prohibiting operation. • If exposing the device to strong vibrations due to rough driving, the device may not ADVICE be able to read the data stored on the disc rendering normal operation impossible.
Read the following prior to using this device When using for the first time Loading the program into the device After purchasing the device and using it for the first time, load the map disc program into the device. Turn the engine ON. •...
Page 7
Select the language • Touch I Agree to use English. • Touch and then to use Français I Agree French. • A map screen appears. • Map screen Wait approx. 30 seconds. Turn the engine OFF. Turn the engine ON and start the device. •...
Read the following prior to using this device How the instruction manuals are organized Use each instruction manual in the following order. The AVN2454 comes with 3 instruction manuals. Use each manual separately depending on how you are using the device.
Read the following prior to using this device How to view this manual Item title Section title A number and title is A title is assigned for each section. assigned for each item. Operation title A title is assigned for each operation purpose.
Page 11
Operation switch Switches needed to perform operations are displayed. Section side heading Only the section side heading will appear in dark letters. Operation screen A screen showing the operation will appear. Go to the next page The operation procedures are continued on the next page.
Read the following prior to using this device Table of Contents For the safe usage of this device Safety precautions When using for the first time Reading the program into the device How the instruction manuals are organized Use each instruction manual in the following order How to view this manual Table of Contents Name of parts...
Page 13
Register your home Register favorite places Route guidance How to start route guidance Search a destination Decide on a destination and start a route search How to search after moving the map How to return home When searching using the freeway entrance/exit name Searching using the latitude/longitude coordinates Route setting Set the desired route...
Page 14
Read the following prior to using this device Adjusting the sound Adjust the sound Other settings Cancel the “PEEP” sound made when operating the switches Switch the screen display size Specifications...
Introduction Name of parts The unit can be operated by pressing buttons on the frame of the panel (panel buttons) and by touching buttons displayed on the screen (touch switches). This device can be operated by remote control. Obtain a card remote control (sold separately) at the store of purchase.
Touch switches Unit can be operated by touching buttons on screen. Touch switch “PEEP” “PEEP” [About operation of touch switch] • Touch the buttons until a beep sound is emitted. • Touch the buttons lightly to prevent damage to the screen. •...
Page 18
Introduction Touch The touch switch displays will disappear. Touch to display the touch switches. Touch these switches with your fingers. Using a pen, pencil or other object with a hard or sharp tip to touch on the screen may cause damage. Caution...
Introduction Turning the power ON or OFF How to turn the power ON or OFF When the engine is turned ON, the DVD/audio power will automatically turn ON and the Caution screen will appear. Touch I Agree to switch to the Navigation screen.The power will turn OFF when turning off the engine.
Introduction Inserting a disc How to insert or eject a CD or DVD Insert an audio CD when wanting to listen to music. How to insert a CD or DVD Press OPEN Touch either OPEN The display will open showing each insert slot.
Page 21
Insert the desired disc into the slot. Map disc, DVD video When the CD or DVD is fully inserted, the display closes automatically. • As soon as an audio CD is inserted, playback starts. • As soon as a map disc is inserted, the navigation screen is displayed. •...
Page 22
Introduction • DVDs labeled with the marks below can be used with this device. ATTENTION • Some functions cannot be used depending on the type of DVD. • When handling a DVD, hold it by pressing one finger on its center rim and another finger on its end with the label up.
Page 23
How to eject a CD or DVD Press OPEN Touch eject either disc. The display will open and the disc(s) are ejected. After removing the disc(s), touch or press CLOSE OPEN The display will close. •If the vehicle's automatic transmission shift lever is in the "P" position or manual transmission lever is in the 1, 3, 5 or "R"...
Introduction Display angle adjustment Adjust the angle of the display The screen viewing angle can be adjusted to any of 6 stepped positions when light from outside the vehicle makes viewing difficult. Press OPEN Touch TILT The display will tilt upwards by one step (5˚).
Introduction Modes Get to know each mode This device has three main modes: “Navigation”, “Information” “Audio DVD”. You can switch from any mode to any mode. Mode Main functions •Present location display •Instructions to destination Navigation •Geographical point registration (home and memory points) •Back monitor function (optional) Information •Setting display...
Introduction Operational conditions Each operation condition for device functions Depending on the following conditions (engine switch position), the device functions may or may not be operable. Operable Inoperable Engine switch ACC/ON ACC/ON Display With parking With parking LOCK opened Each function brake set brake released Some functions are...
Introduction Switching modes Get to know how to switch modes Press the switches below to switch modes. Navigation screen Information Press NAVI Press INFO Audio operation screen Press CONT (Operation time) * (OFF screen) * *1: Appears when the audio or DVD functions are in operation. See the OWNER'S MANUAL / Audio for audio and DVD operations *2: Appears when the audio or DVD functions are turned OFF.
Navigation Map operation Check the positioning of your vehicle Press to display the area in which your vehicle is located. NAVI NAVI switch Vehicle mark The present location and the heading are displayed. The mark will move automatically as per the movements of the vehicle.
Move the map (one-touch scroll) Touch the screen directly to move the map. Scrolling Cursor mark Touch the map and the cursor mark will appear in the middle of the screen. How to view the scroll screen Position name After moving the map, the name of the cursor position will appear for approx.
Navigation Change the map reduction scale Touch the switch and the map reduction scale increases making for a wider range display. Touch the switch and the map reduction scale decreases for a more detailed map display. Touch Touch Scale bar Touch a number to switch the scale to that number.
Change the orientation of the map The orientation of the map displayed on the screen can be switched to either north up (always having the map oriented north) or heading up (always having the map oriented in the direction of the heading). Touch the orientation mark ( ) to switch the map orientation.
Navigation Change the map display method The map display can be changed according to several conditions. There are two types of map display methods: Shows a regular map (flat). Shows a map separated into two halves. Touch Touch the desired display method. The touch switches on the displayed map brighten.
Display various points of interest on the map Various points of interest (landmarks) can be shown on the displayed map. Touch Map View Touch Show POI Icon Touch the to be displayed. POI Icon • Other than the 6 types of multiple landmarks and screens can be displayed.
Navigation Registering places Register your home Register your home before starting to use the device. Registering your home will facilitate the setting of return routes when driving. When at home Press and proceed with operation after the map of the area surrounding your NAVI home appears.
Page 35
Touch Enter Touch Attribute Not Registered Touch for “Home”. Touch Icon Touch the mark to be registered on the map. • Touch to select a different Page 2 With Sound mark. For details see "Changing the symbol of OWNER'S MANUAL the memory point"...
Page 36
Navigation Touch Press NAVI • The present location will appear. NAVI...
Page 37
When at a location other than your home Press to retrieve the MENU MENU screen. MENU Touch My Places Touch in Memory Points. Register Touch Address Enter the House Number one number at a time by touching the number switches on the screen. •...
Page 38
Navigation Touch Enter the Street Name. • If having made a mistake, touch to erase one entry at a time. • A list may appear as you enter the number to facilitate entry. Entering the entire number may not be necessary. Touch the desired Street Name.
Page 39
Touch Enter Touch Attribute Not Registered Touch for “Home”. Touch Icon Touch the mark to be registered on the map. • page 2 WithSound Touch to select a different mark. For details see “Changing the symbol memory point” OWNER'S MANUAL / Navigation Go to the next page...
Page 40
Navigation Touch Press NAVI • The present location will appear. NAVI...
Register favorite places Up to 106 favorite places (including your home and special memory entries) can be registered on the map. Registering a place will make a flag ( ) or a name appear on that spot. How to register from the map Touch the map and move the mark to the spot to be registered.
Page 42
Navigation To register a far away place Register SAFECO FIELD located in Seattle, Washington. Press MENU to retrieve the MENU screen. MENU My Places Touch Register Touch in Memory Points. Touch Change Touch...
Page 43
Touch Touch POI Name Touch in that order. • A list may appear as you enter the number to facilitate entry. Entering the entire number may not be necessary. Touch List • Narrow down the list of candidates using City Category Touch in the list.
Page 44
Navigation Touch 196 S ATLANTIC ST, Touch to move the map. • When not moving the map, start from Touch Enter Touch Icon Touch the to be registered in Icon the map. Page 2 With Sound • Touch to select a different mark.
Page 45
Touch Press NAVI NAVI • The present location will appear.
Navigation Route guidance How to start route guidance Indicating the destination will automatically start a search for routes to that place. This is called “Route Search”. When the route search is complete, a route to the destination is set. This is called “Route Setting”. When starting to drive the vehicle after having set the route, the route to the destination will be guided by voiced instructions and screens that appear as per the set conditions.
Navigation Search a destination Decide on a destination and start a route search Give information on the desired destination and search for a place. When searching immediately after moving the map... [Enter] When returning home (with your home being registered)......[My Places] If the freeway entrance/exit name is known....
Navigation How to search after moving the map Touch the map and move the mark. Touch Enter Touch and align the mark with the destination. Touch Enter • A symbol will appear on the mark position. All routes from the present location to the symbol will be searched for and displayed.
How to return home Press DEST DEST Touch Touch Enter All routes from the present location to your home will be searched for and displayed. • All routes are displayed.
Navigation When searching using the freeway entrance/exit name Press DEST DEST Touch Touch Freeway Ent./Exit Freeway Name Enter the one number at a time by touching the switches on the screen. • If having made a mistake, touch to delete one entry at a time.
Page 51
Touch to select Entrance Exit the entrance or exit. • The freeway entrance/exit names will be listed. Touch the corresponding entrance/exit name. • The indicated entrance/exit map will appear. Touch Enter • Touch to move the map. A route from the present location to the destination will appear.
Navigation Searching using the latitude/longitude coordinates Press DEST DEST Touch Touch Coordinates Enter the “Lat.” one number at a time by touching the switches on the screen. • Touch to switch between north latitude and south latitude. If the geographical point entered is not within the area recorded in the map disc, a map will not appear.
Page 53
Touch The entered point will appear. Touch Enter • Press to move the map. A route from the present location to the destination will appear. • All routes are displayed.
Navigation Route setting Set the desired route After deciding on a destination, recommended routes from the present location to the destination are searched for and displayed on the screen. Routes to the destination will be colored into the screen and the required time and distance to the destination will be displayed.
Page 55
Touch switches Displays different routes enabling their selection. (See P58). 3Routes Enables you to change the displayed route, add a destination or change an interchange (IC). (For details, see Route “Changing the search result route” in the OWNER'S MANUAL / Navigation.) Guide Starts route guidance.
Navigation Check the progression of your journey Touch in the route guidance Guide display. Touch Map View Touch Route Overview Touch Turn List Touch • The route information is displayed in segments at intersections, road type turning points, etc. • Touch to display the map for that area.
Page 57
How to view the route information screen Intersection name display Heading display Interval distance display...
Navigation Select a different route A total of 3 recommended routes will be displayed, Quick 1, Quick 2 and Short, from which you may select one. Touch in the all route 3 Routes diagram display. Touch in the display where Info.
Add stops along the route You can change the route in advance if, for example, wanting to pick up a friend along the way to your destination or add another destination further away from the original one. Adding stops Adding a destination Route Original destination...
Page 60
Navigation Touch in the retrieved map. Enter Touch in the space to be added. • An all route diagram display will appear with the changes. • If setting between the present location and the destination, the addition becomes a stop. •...
Navigation Start route guidance Route guidance Start driving and the device switches screens for each set point of reference, such as intersections, in accordance with the movement of your vehicle. Also, each reference point is announced in a clear voice. Present location screen during route guidance Depending on the route being taken, reference points will be explained using various screens.
Page 62
Navigation Voice route guidance During route guidance, the distance up to a reference point and other information depending on road conditions and vehicle speed are announced with a clear voice. When on a local road Corresponding with the vehicle speed, intersection names, the distances remaining up to intersections and the direction of the turn to be made are announced vocally in accordance with their conditions.
Start driving following the route guidance Touch in the all route Guide diagram display. • The present location screen appears and a voice will announce: You are now driving through … Please follow the actual traffic regulations. Start driving. In the event of having gone off the set route Even if having driven off the set route, the device will automatically make an adjustment to return you to the guided route (auto search function).
Navigation Stop and restart guidance while in progress Guidance can be stopped and restarted while in progress. Press MENU MENU Stop guidance Touch Suspend Guidance • Guidance is stopped. • The route on the map disappears (the mark for the destination remains). Restart guidance To restart guidance Touch Resume Guidance...
Delete the destination The set destination can be erased. Also, the set mark does not disappear even after having arrived at your destination according to the prescribed route. Delete it by performing the operation described below. (However, if setting a new destination, that same mark does not disappear.) Touch...
Page 66
Navigation Touch • If there are destinations remaining, the device will automatically search the remaining destination(s) and an all route diagram will be displayed. • All routes are displayed.
Navigation Other settings How to display a clock on the navigation screen A GPS clock can be displayed on the map screen. Press to retrieve the MENU MENU screen. MENU Touch Setup Touch for Clock Indication. Touch Clock Indication • A clock will appear in the upper left corner of the screen.
Navigation How to turn off the navigation screen The map screen can be turned off when not using the navigation system. Press DISP to retrieve the image quality adjustment screen. DISP Touch • The contrast and brightness can be adjusted from the image quality adjustment screen.
How to correct the present location Even if the vehicle position mark on the map gets out of alignment, the device will automatically correct the present location using map matching and GPS data while you drive (it may take up to several minutes depending on the case).
Page 70
Navigation Adjust Touch for CALIBRATION. Touch Position / Direction Touch and move the map to the actual present location. Touch Enter Correction can be made on a detailed map with a reduction scale of under 0.5 miles. ATTENTION...
Page 71
Touch to set the direction. • To move the direction counterclockwise, touch To move it clockwise, touch Touch Enter...
Navigation Distance correction Press to retrieve the MENU MENU screen. MENU Touch Setup Touch Adjust for Calibration. Touch Tire Change • Automatic correction is performed. • This device uses the GPS and vehicle speed signals to automatically correct the distance (auto correction). However, for a variation greatly exceeding the limits of the automatic correction function (such as when changing a tire or reinstalling the ATTENTION device in another vehicle), distance correction may take some time.
Audio Switching the audio source (mode) Switch the audio source (mode) How to switch to the FM source Press SOURCE The AUDIO MENU screen will appear. SOURCE Touch Touch the desired audio source and that source will appear on the screen. •...
Page 75
AM operation screen FM operation screen CD operation screen MP3 operation screen DVD operation screen CD changer operation screen (optional) The device can automatically switch to the navigation screen or other screen while an audio operation screen is displayed. For details, see “Adjusting / setting the screen”...
Audio Radio operation How to listen to the radio Select radio for the source Touch for AUDIO MENU. Search for a broadcast station Press • Manual tuning press lightly. Tuning switch • Automatic tuning press until a “PEEP” sound is heard.
Page 77
Automatically search for broadcast stations and record them This convenient function can search for broadcast stations from which a signal can be received and record them temporarily into preset switches. If they are not needed, they can easily be switched back to the broadcast stations originally recorded. Touch until a “PEEP”...
Audio CD/MP3 player operation How to listen to a CD/MP3 Playback a CD/MP3 file When a disc is not inserted Insert a disc. Playback will automatically start. When a disc is inserted Touch in AUDIO MENU. Mixing music data and MP3 data on the same disc render...
Page 79
Easy folder and music file selection (MP3 player) An MP3 compresses music data into 1/10 its original size enabling it to store about 10 times the music data of one CD. This device simultaneously displays 9 folders/files enabling the easy selection of desired music files. Folder/file selection switches Touch one of the folder/file selection switches...
Audio DVD player operation How to view a DVD video Playback a DVD When a disc is not inserted Insert a DVD. Playback will automatically start. When a disc is inserted Touch in AUDIO MENU. Some DVDs may not playback automatically. In this case, playback from the disc menu stored in the DVD.
Page 81
Use the disc menu Touch NEXT on the DVD operation screen. Touch MENU TOP MENU Touch Touch and select the desired image. Touch ENTER Stop the DVD Press PWR Switch Press again to playback the DVD from the exact image where it was stopped.
Audio Adjusting the sound Adjust the sound You can meticulously adjust the sound of the music you want to hear to create your own little pseudo-concert hall. The acoustic field can be adjusted to center around the desired position and each speaker’s volume and balance can also be adjusted. Recreate a concert hall as per the sound image Touch NEXT...
Page 83
Adjust the sound in tune with the music being played back Touch NEXT is displayed when touching and then for a DVD or pressing for a VTR or CONT touch the screen. Select the set equalizer curve Touch BACK Touch to record the setting and return the display to the previous screen.
Page 84
Audio Adjust the center of the acoustic field to center around the desired position Touch NEXT is displayed when touching and then SETU for a DVD or pressing for a VTR or CONT touch the screen. Touch POSITION (seat). Touch BACK to record the setting and return the display to the previous screen.
Page 85
Adjust the left/right front/rear volume balance Touch NEXT is displayed when touching and then SET for a DVD or pressing for a VTR or CONT touch the screen. Touch the desired spot within the rectangle ( Touch BACK to record the setting and return the display to the previous screen.
Audio Other settings Cancel the “PEEP” sound made when operating the switches The sound emitted when operating the panel or screen switches can be canceled (muffled). Press to retrieve the INFO INFORMATION screen. INFO Touch SETTING Various adjustments can be done from SETTING For details, see “Setting background screen”...
Switch the screen display size The screen size of DVD and VTR displays can be switched. Switch the DVD/VTR display screen size Touch WIDE is displayed when touching WIDE NEXT then for a DVD. Touch the desired size. Normal mode WIDE 1 mode The size of a regular television screen with either The size of a regular television screen widened...
For reference Specifications GPS antenna Dimensions 34(W) x 13.2(H) x 38(D)mm Weight approx. 25g Power supply voltage 4.6±0.4(V) Power consumption 10 to 30(mA) Usage temperature -30 to 80(˚C) Storage temperature -40 to 100(˚C) Display Liquid crystal panel 6.5 type wide low reflection panel Screen dimensions 143.4(W)x79.3(H)mm Pixel count...
Page 89
Common component Rated output 15Wx4(1kHz,1%4Ω)(EIAJ) Maximum output 50Wx4 (test voltage 14.4V) Suitable load impedance 4Ω (each channel) Power source voltage DC13.2V(11-16V) Grounded Power consumption 0.5Wx4 output time approx.3.7A Approx. 15A max Exterior dimensions 180mm (W), 100mm (H), 165mm (D) Weight Approx.
Page 90
Please retain this booklet and write in the serial number of your AVN2454 for identification. The serial number is labeled or stamped on the chassis. Serial No. DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 (310) 327-2151...