Brother 8085DN - DCP B/W Laser User Manual page 82

Printing difficulties (continued)
Difficulties
The machine does not print
on both sides of the paper
even though the printer
driver setting is Duplex.
The machine is not printing
or has stopped printing and
the machine's status LED is
yellow.
Scanning difficulties
Difficulties
TWAIN errors appear while
scanning.
OCR does not work.
Network scanning does not
work.
Software difficulties
Difficulties
Cannot install software or
print.
Cannot perform '2 in 1' or '4
in 1' printing.
The machine does not print
®
from Adobe Illustrator
Suggestions
Check the paper size setting in the printer driver. You need to
choose A4, Letter, Legal or Folio.
Press Job Cancel. As the machine cancels the job and clears it
from the memory it may produce an incomplete printout.
Suggestions
Make sure that the Brother TWAIN driver is chosen as the primary
source. In PaperPort™ 11SE, click File, Scan or Get Photo and
choose the Brother TWAIN driver.
Try increasing the scanning resolution.
See Network difficulties on page 71.
Suggestions
Run the Repair MFL-Pro Suite program on the CD-ROM. This
program will repair and reinstall the software.
Check that the paper size setting in the application and in the
printer driver are the same.
Try to reduce the print resolution. (See Advanced tab in the
Software User's Guide on the CD-ROM.)
®
.
Troubleshooting and routine maintenance
C
C
C
69