How To Reset; Packing And Shipping The Machine - Brother 8085DN - DCP B/W Laser User Manual

How to reset

a
Press Menu, 1, 8.
18.Reset
1.Network
2.All Settings
Select ab or OK
b
Press a or b to choose 1.Network or
2.All Settings.
Press OK.
c
Press a or b to choose 1.Reset or
2.Exit.
Press OK.
d
If you chose 1.Reset in step c, you
will asked to reboot the machine. Press
a or b to choose 1.Yes or 2.No.
Press OK.
If you choose 1.Yes, the machine will
begin the Restart.
Note
You can also reset the Network settings
by pressing Menu, 5, 0.
108
Packing and shipping
C
the machine
CAUTION
Make sure that the machine has fully
cooled down by leaving it disconnected
from the power for at least 30 minutes
before packing.
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty. The
machine should be adequately insured with
the carrier.
a
Turn off the machine's power switch.
b
Unplug all the cables and AC power
cord from the machine.
c
Push the Scanner Lock Lever down to
lock the scanner. This lever is located on
the left of the scanner glass.
IMPORTANT
Damage caused to your machine by
failure to lock the scanner before packing
and shipping may void your warranty.
d
Press the front cover release button and
open the front cover.
e
Take out the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
C