Optional Paper Tray (Lt-5300); Memory Board - Brother 8085DN - DCP B/W Laser User Manual

Optional paper tray
(LT-5300)
An optional lower tray can be installed, and it
can hold up to 250 sheets of 20 lb (80 g/m
paper.
When an optional tray is installed, the
machine can hold up to 550 sheets of plain
paper.
For setup, see the instructions that we have
supplied with the lower tray unit.

Memory board

This machine has 64 MB of standard memory
B
and one slot for optional memory expansion.
You can expand the memory up to 576 MB by
2
)
installing dual in-line memory modules (SO-
DIMMs). When you add the optional memory,
it increases the performance for both copier
and printer operations.
In general, the SO-DIMMs with the following
specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 1.25 in. (31.75 mm)
Dram Type: SDRAM 2 Bank
The following web sites sell memory
modules:
http://www.crucial.com/
http://www.kingston.com/
http://www.goldenram.com/
http://www.buffalo-technology.com/
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call Brother
Customer Service.
Options
B
B
65