General Setup; Paper Settings; Paper Type; Paper Size - Brother 8085DN - DCP B/W Laser User Manual

3

General Setup

Paper settings

Paper Type

Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Do one of the following:
To set the paper type for the
MP Tray press Menu, 1, 1, 1, 1.
To set the paper type for Tray#1
press Menu, 1, 1, 1, 2.
To set the paper type for Tray#2
press Menu, 1, 1, 1, 3 if you installed
the optional tray.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
11.Paper Type
1.MP Tray
a Plain
b Thick
Select ab or OK
b
Press a or b to choose Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper.
Press OK.
c
Press Stop/Exit.
Note
You can choose Transparency for
Tray #1 and the MP Tray.
22

Paper Size

3
You can use ten sizes of paper for printing
copies: Letter, Legal, Executive, A5, A5 L,
3
A6, B5, B6, Folio and A4.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document.
a
Do one of the following:
To set the paper size for the
MP Tray press Menu, 1, 1, 2, 1.
To set the paper size for Tray#1
1
press Menu, 1, 1, 2, 2.
To set the paper size for Tray#2
press Menu, 1, 1, 2, 3 if you installed
the optional tray.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
12.Paper Size
1.MP Tray
a Letter
b Legal
Select ab or OK
b
Press a or b to choose Letter, Legal,
Executive, A5, A5 L, A6, B5, B6,
Folio, A4 or Any.
Press OK.
c
Press Stop/Exit.
Note
• Any size appears only when you choose
the MP tray.
• If you choose Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
3
3
1