Table of Contents
Advertisement
Chapter 2
Loading documents
Using the automatic
document feeder (ADF)
The ADF can hold up to 50 pages and feeds
each sheet individually. Use standard 20 lb
2
(80 g/m
) paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature: 68° F to 86° F (20 to 30° C)
Humidity: 50% - 70%
Paper: Xerox 4200 (20 lb/Letter)
IMPORTANT
• DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
Note
To scan non-standard documents see
Using the scanner glass on page 21.
Make sure documents written with ink are
completely dry.
20
a
Unfold the ADF document output
2
support flap (1) and the ADF support
flap (2).
2
2
b
Fan the pages well.
c
Place your document face up, top edge
first in the ADF until you feel it touch the
feed roller.
d
Adjust the paper guides (1) to fit the
width of your document.
2
1
1
Advertisement
Table of Contents
