Table of Contents
Advertisement
Menu Item
Purpose
Reset Active
To define the active bin as the start bin (the first bin to receive printed output) in a set of linked
bins.
Bin
Reset Printer
To reset the printer to the user default value for each menu item, delete all downloaded resources
(fonts, macros, and symbol sets) stored in printer memory (RAM), and delete all data in the
interface link buffer.
Before selecting Reset Printer, exit the software application you are using.
Network Menu
Use the Network Menu to change printer settings affecting jobs sent to the printer through a network port
(either Standard Network or Network Opt <x>).
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item
Purpose
To temporarily store jobs on the printer
Job
hard disk before printing.
Buffering
Note: Changing this menu item
automatically resets the printer.
MAC Binary
To configure the printer to process
Macintosh binary PostScript print jobs.
PS
Network
To configure the size of the network
input buffer.
Buffer
Note: Changing the Network Buffer
menu item automatically resets the
printer.
Network <x>
To configure an internal print server.
Setup
Values
Values
Off*
Does not buffer jobs to the hard disk.
On
Buffers print jobs to the hard disk.
Auto
Buffers print jobs only if the printer is
busy processing data from another
input port.
On
Printer processes raw binary
PostScript print jobs from computers
using the Macintosh operating system.
Note: This setting often causes
Windows print jobs to fail.
Off
Printer filters PostScript print jobs
using standard protocol.
Auto*
Printer processes print jobs from
computers using either Windows or
Macintosh operating systems.
Auto*
Printer automatically calculates the
Network Buffer size (recommended
setting).
3K to
User specifies the Network Buffer size.
maximum size
The maximum size depends on the
allowed
amount of memory in your printer, the
size of the other link buffers, and
whether Resource Save is set to On or
Off. To maximize the range for the
Network Buffer size, disable or reduce
the size of the parallel, serial, and USB
buffers.
Values for this menu item are supplied by the specific
print server. Select the menu item to see the available
values.
Note: Refer to the documentation on the drivers CD for
more information.
51
Advertisement
Table of Contents
