Lexmark 17J0050 - C 752n Color Laser Printer User Reference page 56

Menu Item Purpose
Orientation To determine how text and graphics
are oriented on the page.
Pitch To specify the font pitch for scalable
monospaced fonts.
Point Size To change the point size for scalable
typographic fonts.
Symbol Set To choose a symbol set for a specified
font name.
Tray To configure your printer to work with printer drivers or applications that use different source
assignments for the paper trays.
Renumber
Note: Refer to the Technical Reference for more information about assigning source numbers.
1 Select a paper source.
2 Select a value.
Other Tray Renumber selections
Values
Portrait* Prints text and graphics parallel to the
short edge of the paper.
Landscape Prints text and graphics parallel to the
long edge of the paper.
0.08...100 Pitch refers to the number of fixed-
(in increments space characters in a horizontal inch
of 0.01 cpi) of type. You can select a pitch from
0.08 to 100 characters per inch (cpi) in
10*
increments of 0.01 cpi. For
nonscalable monospaced fonts, the
pitch is displayed, but cannot be
changed.
Note: Pitch is only displayed for fixed,
or monospaced, fonts.
1...1008 Point size refers to the height of the
in increments of characters in the font. One point
0.25 points) equals approximately 1/72 of an inch.
You can select point sizes from 1 to
12*
1008 in increments of 0.25 points.
Note: Point Size is only displayed for
typographic fonts.
10U PC-8* A symbol set is a set of alphabetic and
(country/region- numeric characters, punctuation, and
specific factory special symbols used when printing
default values) with a selected font. Symbol sets
support the different requirements for
12U PC-850*
languages or specific applications,
(country/region-
such as math symbols for scientific
specific factory
text. Only the symbol sets supported
default values)
for the selected font name are
displayed.
Assign Tray <x>
Assign MP Feeder
Assign Man Env
Assign Man Paper
Off* Printer uses factory default paper
source assignments.
0...199 Select a numeric value to assign a
custom value to a paper source.
None Paper source ignores the Select Paper
Feed command.
View Factory Press
Def default value assigned to each paper
source.
Restore Select Yes to return all tray
Defaults assignments to factory default values.
56
to display the factory
Menu