Lexmark 17J0050 - C 752n Color Laser Printer User Reference page 48

Menu Item Purpose
Multipage To determine the orientation of a
multipage sheet.
View
Offset Pages To offset the output of each print job or
each copy of a print job, making it
easier to separate the documents
stacked in the output bin.
Separator To insert blank separator sheets
between jobs, between multiple copies
Sheets
of a job, or between each page of a
job.
Separator To specify the paper source that holds
separator sheets.
Source
Staple Job To set stapling as the default for all
print jobs. (Select stapling from the
printer driver if you want to staple only
specific jobs.)
Staple Prime To specify the paper source you want
the printer to use when it primes the
Src
stapler. When a staple cartridge is
replaced or a staple jam is cleared, the
printer may need to prime the stapler
by stapling a sheet of paper several
times.
Values
Auto* Lets the printer choose between
portrait and landscape orientation.
Long Edge Sets the long edge of the paper as the
top of the page (landscape).
Short Edge Sets the short edge of the paper as the
top of the page (portrait).
None* Stacks all sheets directly on top of
each other.
Between Offsets each copy of a print job.
Copies
Between Jobs Offsets each print job.
None* Does not insert separator sheets.
Between Inserts a blank sheet between each
Copies copy of a job. If Collation is Off, a blank
page is inserted between each set of
printed pages (all page 1's, all page
2's, and so on). If Collation is On, a
blank page is inserted between each
collated copy of the job.
Between Jobs Inserts a blank sheet between jobs.
Between Inserts a blank sheet between each
Pages page of a job. This is useful if you are
printing transparencies or want to
insert blank pages in a document for
notes.
Tray <x> Selects separator sheets from the
(Tray 1*) specified tray.
MP Feeder Selects separator sheets from the
multipurpose feeder. (You must also
set Configure MP to Cassette.)
Off* Does not staple print jobs.
On Staples each print job sent to the
printer.
Tray <x> Selects paper from the specified tray.
(Tray 1*)
MP Feeder Selects paper from the multipurpose
feeder.
48