Understanding Printer Messages - Lexmark P910 User Manual

Troubleshooting
3
Press Enter, or click OK.
The Device Manager opens.
4
Click the plus sign (+) beside Universal Serial Bus controllers.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
For more information, see the computer documentation.
R
EMOVE AND REINSTALL THE PRINTER SOFTWARE

Understanding printer messages

Alignment Problem
Try any of the following:
•
Check the ink cartridges.
1
Open the printer, and then remove and reinstall the ink cartridges.
2
Load a plain and unmarked A4‑ or letter‑size paper.
The printer will read any markings on used paper, which could cause the alignment error message to reappear.
3
Close the printer.
4
Touch OK or press
• Press to clear the message.
Cannot Collate Job
Try one or more of the following:
•
Touch Continue to print the pages that were saved in the printer memory, and then collate the remainder of the
print job.
•
Touch Cancel Printing to cancel the current print job.
Change [Paper Source] to [Size] Paper
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
•
Touch Paper Loaded, Continue to continue printing after loading the correct paper size and paper type in the default
paper tray.
• Press to cancel the current job.
to retry, depending on your printer model.
136