Resolving Intermittent Wireless Communications Issues - Lexmark P910 User Manual

Troubleshooting
5
Click the Ports tab.
6
Locate the selected port. The selected port has a check beside it in the Port column.
7
If the Description column of the selected port indicates that it is a USB port, then scroll through the list and select
the port with Printer Port in the Description column. Check the printer model in the Printer column to make sure
you select the right printer port.
8
Click OK, and then try to print again.
M
AKE SURE BIDIRECTIONAL COMMUNICATION IS ENABLED
Note: This solution applies to Windows users only.
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
4
Right‑click the printer, and then select Properties or Printer properties from the menu.
5
Click the Ports tab.
6
Click the box next to Enable bidirectional support if it is not already checked.
7
Click Apply > OK, and then try to print again.

Resolving intermittent wireless communications issues

You may notice that your printer works for a short time and then stops working, although apparently nothing has
changed on your wireless network.
Many different issues can interrupt network communications, and sometimes more than one problem exists at the
same time. Try one or more of the following:
D VPN
ISCONNECT FROM ALL
Most Virtual Private Networks (VPNs) allow computers to communicate with only the VPN and no other network at
the same time. Disconnect from the VPN before installing the driver on the computer or before running the wireless
setup on the computer.
To check if the computer is currently connected to a VPN, open your VPN Client software and check your VPN
connections. If you do not have a VPN Client software installed, then check the connections manually using the
Windows VPN Client.
If you would like to have the ability to connect to your local network and to a VPN at the same time, then request
the system support person for the VPN to allow split tunneling. Be aware that some organizations will not allow split
tunneling due to security or technical concerns.
T
URN OFF THE ACCESS POINT
Wait one minute for the printer and computer to reestablish the connection. This can sometimes refresh network
connections and resolve connectivity issues.
S WHEN ATTEMPTING TO USE THE WIRELESS NETWORK
( )
WIRELESS ROUTER AND TURN IT BACK ON
172