About The Default Accounts; Defining Local User Accounts; How To Display Account Information - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

About the default accounts

Fabric OS provides the following predefined accounts in the switch-local user database. Change the
password for all defaults during the initial installation and configuration, see
Table 13 Default local user accounts
Account Name Role
user
admin
root
factory

Defining local user accounts

In addition to the default administrative and user accounts, Fabric OS supports up to 256 user-defined
accounts in each logical switch (domain). These accounts expand your ability to track account access and
audit administrative activities.
The following procedures can be performed on local user accounts. Administrators can act on other
accounts only if that account has an Admin Domain list that is a subset of the administrator.
NOTE: When operating in secure mode, you must perform these operations on the primary FCS switch.
The userConfig command with Admin Domain-related options is not valid in secure mode.

How to display account information

1. Connect to the switch and log in.
2. Enter one of the show commands:
• userConfig --show -a to show all account information for a logical switch
• userConfig --show -b to show all backup account information for a logical switch
• userConfig --show username to show account information for the specified account
• userConfig --showad -a admindomain_ID to show all accounts permitted to select the
specified admindomain_ID
66 Managing user accounts
Admin
domain
User AD0
home: 0
Admin AD0-255
home: 0
Root AD0-255
home: 0
Factory AD0-255
home: 0
Description
Most commands have observe-only permission.
Most commands have observe-modify permission.
Reserved
Reserved
Table 13.