Validating An Admin Domain Member List; How To List The Switches And Devices In An Ad Member List; Using Admin Domains; Using Cli Commands In An Ad Context - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Validating an Admin Domain member list

The ad --validate option allows you to validate the device and switch member list and flag all
resources that are from AD-unaware switches. You can use the validate option to list Admin Domain
members from AD-unaware switches and non-existing or offline Admin Domain members.
You can use the validate option to identify misconfigurations of the Admin Domain. For example, in
fabrics with a mix of AD-aware and AD-unaware switches, elements in the Admin Domain member list from
old AD-unaware switches are not enforced.
The Admin Domain validation process is not applicable for AD0, as AD0 implicitly assumes all unassigned
and AD-unaware online switches and their devices.

How to list the switches and devices in an AD member list

1. Connect to the switch and log in as admin.
2. Switch to the AD255 context, if you are not already in that context.
ad --select 255
3. Enter the ad --validate command.
ad --validate ad_id -m mode
If you do not specify any parameters, the entire AD database (transaction buffer, defined configuration,
and effective configuration) is displayed.
If you do not specify an Admin Domain, information about all existing Admin Domains is displayed.
The -m mode flag can be used as follows:
• 0 to display the Admin Domain configuration in the current transaction buffer.
• 1 to display the Admin Domain configuration stored in the persistent memory (defined
configuration).
• 2 to display the currently enforced Admin Domain configuration (effective configuration).
The following example validates the member list of Admin Domain 10 in the current transaction buffer.
sw5:AD255:admin> ad --validate 10 –m 0

Using Admin Domains

This section is for users and administrators and describes how you use Admin Domains. If you are a
physical fabric administrator and you want to create, modify, or otherwise manage Admin Domains, see
"Managing admin
The Admin Domain looks like a virtual switch or fabric to a user. However, based on the user role and type
(User_ID), users are presented with only their relevant AD-based views (see
devices and switch ports that are not defined as part of the Admin Domain are not shown and are not
available to that AD user.
Each Admin Domain can also have its own zone configurations (defined and effective) with zones and
aliases under them.

Using CLI commands in an AD context

The CLI command input arguments are validated against the AD member list; they do not work with input
arguments that specify resources that are not members of the current Admin Domain. All commands
present filtered output—showing only the members of the current Admin Domain.
For example, switchShow displays details for the list of AD members present in that switch.
• Since all E_Ports and EX_Ports are shared across all Admin Domains, they are shown under all Admin
Domains.
• Other ports are displayed without any attribute details (with an explanation that they are not part of the
your Admin Domain).
domains" on page 158.
Figure 3 and Figure
Fabric OS 5.3.0 administrator guide 165
4). Any