Converting port number to area ID
Except for the following cases, the area ID is equal to the port number:
•
when you perform a port swap operation
•
when you enable Extended Edge (also known as "displaced PID") PID on the Director
If you are using Extended Edge PID format (for example, the 4/256 SAN Director with configuration option
5) and would like to map the output of the port number to the area ID, use the following formula (for ports
0- 1 27):
a = (p + 16) % 128
where:
aarea
pport number
%modulus (or remainder)
0 p 128
Fabric OS 5.3.0 administrator guide 433