HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 181

This command will cause the active CP to reset and will require
that existing telnet or SSH sessions be restarted.
Do you want to continue [Y]: y
The firmware is being downloaded to the Standby CP. It may take up to 10 minutes
Do you want to continue [Y]: y
12. Optionally, after the failover, connect to the switch, and log in again as admin. Using a separate
session to connect to the switch, enter the firmwareDownloadStatus command to monitor the
firmware download status.
sw77:root> firmwareDownloadstatus
[1]: Thu Jul 28 00:30:49 2005
Slot 2 (SAS): Firmware is being downloaded to the blade. It may take up to 30 minutes.
[2]: Thu Jul 28 00:30:49 2005
Slot 7 (SAS): Firmware is being downloaded to the blade. It may take up to 30 minutes.
[3]: Thu Jul 28 00:37:42 2005
Slot 2 (SAS): Firmware has been downloaded successfully to the blade.
[4]: Thu Jul 28 00:37:42 2005
Slot 7 (SAS): Firmware has been downloaded successfully to the blade.
[5]: Thu Jul 28 00:37:50 2005
Slot 2 (SAS): Blade is rebooting.
[6]: Thu Jul 28 00:37:50 2005
Slot 7 (SAS): Blade is rebooting.
[7]: Thu Jul 28 00:37:50 2005
Slot 2 (SAS): Firmware commit is started.
[8]: Thu Jul 28 00:37:50 2005
Slot 7 (SAS): Firmware commit is started.
[9]: Thu Jul 28 00:37:50 2005
Slot 2 (SAS): Firmware commit has completed.
[10]: Thu Jul 28 00:37:50 2005
Slot 7 (SAS): Firmware commit has completed.
(Firmwaredownload has completed.)
Fabric OS 5.3.0 administrator guide 183