Taking The Sf Module Offline In A J-Ex8208 Switch - Dell PowerConnect J-EX8208 Hardware Manual

Dell PowerConnect J-Series J-EX8208 Ethernet Switch Hardware Guide
Related
Documentation

Taking the SF Module Offline in a J-EX8208 Switch

Related
Documentation
168
Figure 84: Removing an SRE Module from a J-EX8208 Switch
Installing an SRE Module in a J-EX8208 Switch on page 118
Switch Fabric and Routing Engine (SRE) Module in a J-EX8208 Switch on page 22
The SF module provides switching functionality for a J-EX8208 switch. Your switch can
have either zero SF modules or one SF module.
NOTE: If you take the SF module offline in a switch configuration having only
one Switch Fabric and Routing Engine (SRE) module, throughput will be low.
To take the SF module offline:
Take the SF module offline:
1.
user@switch> request chassis cb offline slot 2
For an SF module, the control board slot number is always
(Optional) Confirm that the SF module is offline:
2.
user@switch> show chassis environment cb slot-number
The state field in the command output shows that the SF module is offline. It is now
safe to remove or replace the SF module.
Installing an SF Module in a J-EX8208 Switch on page 120
.
2