Dell PowerConnect J-EX8208 Hardware Manual page 163

Powerconnect j-series ethernet switch
Hide thumbs Also See for PowerConnect J-EX8208:
Table of Contents

Advertisement

On the J-Web login page, type root as the username, leave the password field blank,
4.
and click Login.
On the Introduction page, click Next.
5.
On the Basic Settings page, modify the hostname, the root password, and date and
6.
time settings:
Enter the hostname. This is optional.
Enter a password and reenter the password.
Specify the time zone.
Synchronize the date and time settings of the switch with the management PC or
set them manually by selecting the appropriate option button. This is optional.
Click Next.
Use the Management Options page to select the management scenario—Out-of-band
7.
Management—Configure management port. Select this option to configure only the
management interface. Click Next. Specify the IP address and default gateway for
the management interface.
Click Next.
8.
On the Manage Access page, you may select options to enable Telnet, SSH, and SNMP
9.
services. For SNMP, you can configure the read community, location, and contact.
Click Next. The Summary screen displays the configured settings.
10.
Click Finish.
11.
The configuration is committed as the active switch configuration. You can now log in
with the CLI or the J-Web interface to continue configuring the switch.
If you use the J-Web interface to continue configuring the switch, the Web session is
redirected to the new management IP address. If the connection cannot be made, the
J-Web interface displays instructions for starting a J-Web session.
Related
Connecting and Configuring a J-EX Series Switch (CLI Procedure) on page 144
Documentation
Installing and Connecting a J-EX8208 Switch on page 89
NOTE: On J-EX8200 switches, only the out-of-band management option
is available.
NOTE: After the configuration is committed, the connectivity between the
PC and the switch might be lost. To renew the connection, release and renew
the IP address by executing the appropriate commands on the management
PC or by removing and reinserting the Ethernet cable.
Chapter 11: Performing Initial Configuration
147

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect j-8208

Table of Contents