Ac Power Supply Leds In A J-Ex8200 Switch - Dell PowerConnect J-EX8208 Hardware Manual

AC Power Supply LEDs in a J-EX8200 Switch

Table 22: Power Supply LEDs on J-EX8200 Switches
LED
INPUT OK
Calculating Power Requirements for a J-EX8208 Switch on page 79
Installing an AC Power Supply in a J-EX8200 Switch on page 114
Removing an AC Power Supply from a J-EX8200 Switch on page 161
An AC power supply has three LEDs on its faceplate. These LEDs display information
about the status of the power supply. See Figure 23 on page 37.
Figure 23: AC Power Supply LEDs on a J-EX8200 Switch
Table 22 on page 37 describes the LEDs on an AC power supply in a J-EX8200 switch.
State
Unlit
Green
Yellow
NOTE: This LED state
applies only to 2000 W AC
power supplies.
Chapter 2: Component Descriptions
Description
Indicates one of the following:
Power supply is disconnected from AC power feed.
AC power input voltage is not within normal
operating range.
No AC power input.
AC power input voltage is high line (200–240 VAC).
AC power input voltage is low line (100–120 VAC).
37