Dell PowerConnect J-Series J-EX8208 Ethernet Switch Hardware Guide
Non-Regulatory Environmental Standards
Related
Documentation
Compliance Statements for Acoustic Noise for J-EX Series Switches
Related
Documentation
248
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio or TV technician for help.
NEBS compliance—These J-EX Series switch models are Network Equipment Building
System (NEBS) compliant:
All J-EX8200 models
Those switch models meet the following NEBS compliance standards:
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment
GR-63-CORE: NEBS, Physical Protection
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an Isolated DC return (DC-I), as
defined in GR-1089-CORE.
Agency Approvals for J-EX Series Switches on page 245
Compliance Statements for Acoustic Noise for J-EX Series Switches on page 248
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel
beträgt 70 dB(A) oder weniger gemäss EN ISO 7779
Translation:
The emitted sound pressure is below 70 dB(A) per EN ISO 7779.
Agency Approvals for J-EX Series Switches on page 245
Compliance Statements for EMC Requirements for J-EX Series Switches on page 246