Lift - Dell PowerConnect J-EX8208 Hardware Manual

Dell PowerConnect J-Series J-EX8208 Ethernet Switch Hardware Guide
106
Figure 47: Installing a Square-Hole Cage Nut
Load the switch onto the lift, making sure it rests securely on the lift platform.
3.
Figure 48: Installing the J-EX8208 Switch Chassis Using a Mechanical

Lift

Using the lift, position the switch in front of the rack or cabinet, centering it in front of
4.
the adjustable mounting brackets and/or power cord tray installed in the rack.
Lift the chassis approximately 0.75 in. (1.9 cm) above the surface of the adjustable
5.
mounting brackets or power cord tray. Position the chassis in the rack as close as
possible to resting on the support that the mounting brackets and/or power cord tray
provide.