Chassis Physical Specifications Of A J-Ex8208 Switch - Dell PowerConnect J-EX8208 Hardware Manual

Related
Documentation

Chassis Physical Specifications of a J-EX8208 Switch

Table 5: Physical Specifications of the J-EX8208 Switch Chassis
Description
Chassis height
Chassis width
Chassis depth
Weight
NOTE: If you want to purchase additional AC power supplies for your switch
configuration, you must order them separately.
Chassis Physical Specifications of a J-EX8208 Switch on page 7
Switch Fabric and Routing Engine (SRE) Module in a J-EX8208 Switch on page 22
Switch Fabric (SF) Module in a J-EX8208 Switch on page 25
8-port SFP+ Line Card in a J-EX8200 Switch on page 27
48-port SFP Line Card in a J-EX8200 Switch on page 28
48-port RJ-45 Line Card in a J-EX8200 Switch on page 29
AC Power Supply in a J-EX8200 Switch on page 34
Cooling System and Airflow in a J-EX8208 Switch on page 38
Backplane in a J-EX8208 Switch on page 41
The J-EX8208 switch chassis is a rigid sheet-metal structure that houses the other switch
components. Table 5 on page 7 summarizes the physical specifications of the J-EX8208
switch chassis. See Figure 2 on page 8.
Value
24.25 in. (61.6 cm)
17.25 in. (43.82 cm)
The outer edges of the front-mounting brackets extend the width to 19 in. (48.3 cm).
20 in. (50.8 cm)
The depth from the front-mounting bracket to chassis rear is 20.69 in. (52.6 cm).
Chassis with backplane: 89 lb (41 kg)
Redundant configuration: 187 lb (85 kg)
Fully loaded chassis: 284 lb (129 kg)
See "J-EX8208 Switch Configurations" on page 6.
NOTE: The fully loaded chassis weight includes the heaviest line cards in all eight
slots. If your switch configuration has lighter line cards, the fully loaded chassis weight
will be in the 268-284 lb (122-129 kg) range.
Chapter 1: Dell PowerConnect J-Series J-EX8208 Switch Overview
7