Time Zone And Dst - D-Link xStack DES-3526DC User Manual

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

Time Zone and DST

The following are windows used to configure time zones and Daylight Savings time settings for SNTP. Open the Configuration
folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following window.
The following parameters can be set:
Parameter
Daylight Saving
Time State
Daylight Saving
Time Offset in
Minutes
Time Zone Offset
from GMT in +/-
HH:MM
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning
and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second week
of April and end DST on Sunday during the last week of October.
From: Which Day
From: Day of Week
From: Month
From: time in
HH:MM
To: Which Day
Figure 6- 56. Time Zone and DST Settings window
Description
Time Zone and DST Settings
Use this pull-down menu to enable or disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST offset
- 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean
Time (GMT.)
DST Repeating Settings
Enter the week of the month that DST will start.
Enter the day of the week that DST will start on.
Enter the month DST will start on.
Enter the time of day that DST will start on.
Enter the week of the month the DST will end.
79