Forwarding Filtering; Unicast Forwarding; Multicast Forwarding - D-Link xStack DES-3526DC User Manual

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

Forwarding Filtering

Unicast Forwarding

Open the Forwarding Filtering folder in the Configuration menu and click on the Unicast Forwarding link. This will open the
Setup Static Unicast Forwarding Table, as shown below:
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter
VLAN ID (VID)
MAC Address
Allowed to Go Port
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the corresponding X
under the Delete heading.

Multicast Forwarding

The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding Filtering
folder and click on the Multicast Forwarding link to see the entry screen below:
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding
table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below:
Figure 6- 32. Setup Static Unicast Forwarding Table window
Description
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
The MAC address to which packets will be statically forwarded. This must be a unicast
MAC address.
Allows the selection of the port number on which the MAC address entered above resides.
Figure 6- 33. Static Multicast Forwarding Settings window
55