D-Link xStack DES-3526DC User Manual page 107

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Parameter
Profile ID (1-5)
Type
VLAN
Source MAC
Destination MAC
802.1p
Ethernet type
Click Apply to set this entry in the Switch's memory.
The page shown below is the CPU Interface Filtering Profile Configuration for IP page.
Figure 6- 72. CPU Interface Filtering Profile Configuration window for IP
The following parameters can be modified:
Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 5.
Select profile based on Ethernet (MAC Address), IP address or packet content mask. This
will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
•
header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet
•
header.
Selecting this option instructs the Switch to examine the VLAN identifier of each packet
header and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Enter a value from 0-7 to specify that the access profile will apply only to packets with this
802.1p priority value.
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
93