3.4.1 How to Confirm Current Settings
You can use a self-test to confirm the current settings. See "Self Tests" on page 3-31.
3.4.2 Adjusting the Roll Paper Width
Follow the procedure below to adjust the roll paper width.
1. Open the roll paper cover.
2. Install/remove/adjust the roll paper guide (PG-58).
Open the roll paper cover and remove the screw on the right end. Do not discard the screw, as it
may be reused later.
Insert the tab on the paper guide into the hook on the printer and then push the paper guide into
place.
Tab
Hook
Rev. A
TM-H6000II Technical Reference Guide
Screw
Setup 3-17