Setup Flow - Epson TM H6000 - B/W Direct Thermal Technical Reference Manual

If receipt is FEED
selected
RELEASE
If slip is FEED
selected
RELEASE
If receipt is FEED
selected
RELEASE
If slip is FEED
selected
RELEASE
Note:
The default setting of the ESC/POS command is "Enable."

3.2 Setup Flow

You have to set up your printer to use it. And you can adjust some feature by customizing them.
This section describes the setup.
3-4 Setup
Normal Mode
All covers are Paper roll cover
closed is opened
Follow ESC/POS Disabled
command
Follow ESC/POS Enabled
command
Follow ESC/POS Follow ESC/POS
command command
Follow ESC/POS Enabled
command
Slip ejection waiting status
Slip insertion
waiting status All covers are
closed
— —
— —
Disabled Follow ESC/POS
command
Disabled Follow ESC/POS
command
Unit cover is Front cover is
opened opened
Disabled Follow ESC/POS
command
Enabled Enabled
Paper roll cover Unit cover is
is opened opened
— —
— —
Follow ESC/POS Enabled
command
Enabled
Front cover is
opened
—
—
Enabled
Rev. A