Epson Opos Adk Supported Environment; Esc/Pos Command; How To Get A Driver; Connection Form And Cables - Epson TM H6000 - B/W Direct Thermal Technical Reference Manual

2.1.2.3 EPSON OPOS ADK Supported Environment

Supported interfaces
• Serial, Parallel, USB, EtherNet
Supported Operating Systems: Epson has confirmed performance with the following:
• Windows 95 English Version Standard OSR2.5
• Windows 98 English Version Second Edition
• Windows NT Ver 4.0 English Version SP5, SP6
• Windows 2000 English Version
Supported Development Languages
• Visual Basic
• VisualC++

2.1.3 ESC/POS Command

Print/control by ESC/POS commands is direct control for TM printers using the ESC/POS
commands proposed by EPSON. Sending ESC/POS commands to the printer from an
application enables direct control of the printer. For the detailed information regarding the
ESC/POS commands, contact the dealer where you purchased the product.
Note:
USB specification printer needs the USB driver and the Ethernet specification printer needs the IP
setting utility in addition.
For detailed information, see item 4.1.4 Driver Information and Download Site in this Chapter.

2.1.4 How to Get a Driver

Please contact EPSON or your dealer about OPOS, APD, and ESC/POS.

2.2 Connection Form and Cables

2.2.1 USB

The TM printer can be connected to the host PC via a USB connector, and other TM printers can
be connected to the first printer via USB. (See "Changing the DIP Switch Settings" in Chapter 3
for DIP switch settings.)
Rev. A
TM-H6000II Technical Reference Guide
System Planning 2-5