Figure 78: Host Bandwidth Limit Configuration (25 Mbps) - Dell Precision R5400 User Manual

TERA1x00 PC-over-IP Administrative Interface User Manual
TER0606004 Issue 3
3. Select the Bandwidth webpage from the Configuration menu

Figure 78: Host Bandwidth Limit Configuration (25 Mbps)

4. Enter 25 in the Device Bandwidth Limited field
5. Enter 20 in the Device Bandwidth Target field
6. Select the Apply button to accept the changes
7. Repeat for the other three user Hosts
The bandwidth is now limited to 25 Mbps and targeted to 20 Mbps for each user.
Figure 79 shows simplified bandwidth usage with the limit for each user now
configured for 25 Mbps. Here it can be seen that all users are limited to 25 Mbps
and do not have access to more bandwidth when required. It can be seen that even
when the usage is totaled, the total switch bandwidth (100 Mbps) is never fully used.
Also note that since there is no congestion, there is no requirement to reduce the
bandwidth to the targeted 20 Mbps or lower.
© 2008 Teradici Corporation Page 97 of 111