TERA1x00 PC-over-IP Administrative Interface User Manual
TER0606004 Issue 3
1.5.12.1 Old Password
The Old Password field must match the current administrative password for the
update to take place.
1.5.12.2 New Password
The New Password field will be the new administrative password for both the web
interface and the local OSD GUI.
Note: The Host and Portal passwords are changed individually.
1.5.12.3 Confirm New Password
The Confirm New Password field must match the New Password field for the
change to take place.
1.5.13 Reset Parameters
The Reset webpage allows resetting all the configurable parameters stored in flash.
Note: The Portal Reset Parameters can also be initiated using the Portal OSD. See
Section 2.3.9 Reset.
Figure 18: Reset Parameters Webpage
1.5.13.1 Reset Parameters
The Reset Parameters button resets all configuration and permissions to factory
default values. When this button is selected, the web interface will prompt the
administrator for confirmation to prevent accidental resets.
© 2008 Teradici Corporation
Page 36 of 111