TERA1x00 PC-over-IP Administrative Interface User Manual
Figure 16: Time Configuration Webpage
1.5.11.1 Current Time
The Current time field displays the time based on the NTP.
1.5.11.2 Enable NTP
The Enable NTP field allows enabling and disabling of the NTP feature.
1.5.11.3 Identify NTP Host By
The Identify NTP Host by selector allows the administrator to choose whether the
NTP Host is identified by IP address or by Fully Qualified Domain Name (FQDN). If
NTP is disabled, this field is not required and is not editable.
Table 3 shows the configuration parameters available when either method is chosen.
If an invalid IP address or DNS name is entered, the web interface will prompt the
administrator to correct it.
Table 3: NTP Host Method
Method
Data Fields
IP address
NTP Host IP Address
FQDN
NTP Host DNS name
© 2008 Teradici Corporation
TER0606004 Issue 3
Page 34 of 111