Table of Contents
Advertisement
Controller has failed
Description
The hard drive or the associated controller is defective.
Data error
Description
The floppy or hard drive cannot read the data. For the Windows operating system, run the
chkdsk utility to check the file structure of the floppy or hard drive. For any other operating
system, run the appropriate corresponding utility.
Decreasing available memory
Description
One or more memory modules may be faulty or improperly seated. Re-install the memory
modules and, if necessary, replace them.
Diskette drive 0 seek failure
Description
A cable may be loose or the computer configuration information may not match the hardware
configuration.
Diskette read failure
Description
The floppy disk may be defective or a cable may be loose. If the drive access light turns on, try
a different disk.
Diskette subsystem reset failed
Description
The floppy drive controller may be faulty.
Gate A20 failure
Description
One or more memory modules may be faulty or improperly seated. Reinstall the memory
modules and, if necessary, replace them.
General failure
Description
The operating system is unable to carry out the command. This message is usually followed by
specific information—for example, Printer out of paper. Take the appropriate action to resolve
the problem.
Hard-disk drive configuration error
Description
The hard drive failed initialization.
52
Advertisement
Table of Contents
