TERA1x00 PC-over-IP Administrative Interface User Manual
Figure 20: USB Permissions Webpage
1.6.1.1 Authorized Devices
The Authorized Devices section allows specifying the authorized USB devices for
the Portal. There are two buttons to allow customization of this "white list". The Add
new button allows adding a new device or device group, while the Remove button
allows its removal.
Selecting the Add new button allows USB authorization by ID or Class. If Class is
selected, then this entry authorizes a USB device by Device Class, Sub Class and
Protocol. If ID is selected, then this entry authorizes a USB device by Vendor ID
and Product ID.
Note: The USB authorization/unauthorization is applied in the following priority order
(Unauthorized Vendor ID/Product ID has highest priority):
1. Unauthorized Vendor ID/Product ID
2. Authorized Vendor ID/Product ID
3. Unauthorized Device Class/Sub Class/Protocol
4. Authorized Device Class/Sub Class/Protocol
Table 4 summarizes the USB authorization entry type and the associated data fields.
Table 4: USB Device Authorization Entry Types
Entry
Required
Type
Fields
Hexadecimal Value
© 2008 Teradici Corporation
TER0606004 Issue 3
Comments
Page 38 of 111