TERA1x00 PC-over-IP Administrative Interface User Manual
Figure 49: Reset
2.3.9.1 Reset Parameters
The Reset Parameters Reset button resets all configuration and permissions to
factory default values. When this button is selected, the OSD will prompt the
administrator for confirmation to prevent accidental resets.
2.4 Diagnostics
The Diagnostics window allows the administrator to access the window tabs with
diagnostics concerning the Portal. The tabs in the Diagnostics window are:
•
Event Log
•
Session Statistics
•
PCoIP Processor
•
Ping
Each tab has an associated Close button to close the window.
2.4.1
Event Log
The Event Log tab allows viewing and clearing of event log messages from the
Portal.
Note: The Event Log (terse or verbose) can also be initiated using the Webpage
Administration Interface. See Section 1.7.1 Event Log.
© 2008 Teradici Corporation
TER0606004 Issue 3
Page 71 of 111