Dhcp And Enable Host Discovery Example; Portal Dhcp And Discovery Configuration; Figure 66: Peer-To-Peer Connect Screen - Dell Precision R5400 User Manual

TERA1x00 PC-over-IP Administrative Interface User Manual

Figure 66: Peer-to-Peer Connect Screen

2. When connected, the Host computer is ready to use over PC-over-IP

4.2 DHCP and Enable Host Discovery Example

This example covers configuring the Portal and Host for use with a DHCP server and
the Host Discovery feature without the use of a Connection Management Server.
The following starting IP addresses are used for this example:
•
Portal: IP Address: 192.168.0.111
•
Host: IP Address: 192.168.1.222
Note: To configure for DHCP and Host Discovery, it is required to know the IP
address of the Portal and Host regardless if it is set as statically or dynamically.
4.2.1

Portal DHCP and Discovery Configuration

Note: Although this example uses the Administration Web Interface for configuring
the Portal for DHCP and Host Discovery operation, the Portal OSD may also be used
to configure the Portal. See Section 2 On Screen Display (OSD) for matching OSD
functionality.
Configure the Portal for DHCP and Discovery:
1. Open the Portal Administration Web Interface by using an internet browser to
open the Portal IP address, e.g. https://192.168.0.111
© 2008 Teradici Corporation
TER0606004 Issue 3
Page 88 of 111