Dynex DX-E401 User Manual page 52

52
3 Click
Internet Protocol (TCP/IP)
(TCP/IP) Properties screen opens.
4 Enter the static IP address and subnet mask. (The IP addresses on your
network must be within the same range. For example, if one computer has
an IP address of 192.168.0.2, the other computers should have IP addresses
that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask
must be the same for all the computers on your network.)
5 Enter your DNS server addresses (if you are entering a DNS server, you must
enter the IP address of the Default Gateway). The DNS server information is
be supplied by your ISP (Internet Service Provider).
6 Click
OK
Configuring your computers
, then click
to save your changes and exit.
. The Internet Protocol
Properties