Dynex DX-E401 User Manual page 35

Configuring the router
3 Enter the following, as appropriate:
Field
Time Zone Your time zone.
Default NTP Server Network Time Protocol (NTP) synchronizes computer clock times in a network of
computers. (Optional)
Set the Time To manually input the time, enter the values in these fields for the year, month,
day, hour, minute, and second, then click Set Time.
Daylight Saving To select daylight saving time manually, click enabled or disabled, then enter a
start date and an end date for daylight saving time.
C
ONFIGURING THE SYSTEM SETTINGS
The current system settings can be saved as a file onto the local hard drive. The
saved file, or any other saved setting file, can be loaded back on the router.
To reload a system settings file:
• Click
Browse
used, then click Load to load the file.
- OR -
Click
Restore
To configure the system settings:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
Description
to browse the local hard drive and locate the system file to be
to reset the router to factory settings.
35