Dynex DX-GB5PRT Quick Setup Manual

DX-GB5PRT_10-1123_QSG_V1.eps DX-GB5PRT_10-1123_QSG_V1.eps 1 1 10/29/2010 10/29/2010
DX-GB5PRT
5-Port Gigabit Ethernet Switch
QUICK SETUP GUIDE
10:16:02 AM 10:16:02 AM
Congratulations on your purchase of the DX-GB5PRT Dynex 5-Port
Gigabit Ethernet Switch. The DX-GB5PRT provides increased speed and
backbone connections to make Gigabyte a reality.
Safety Notices
• Do not use this product near water, for example, in a wet basement
or near a swimming pool.
• Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not place heavy objects on the switch.
• Allow room for adequate ventilation.
Package contents
• DX-GB5PRT Dynex 5-Port Gigabit Ethernet Switch
• Quick Setup Guide
Features
• Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p
standards
• Five 10/100/1000M RJ45 ports
• Supports IEEE 802.1p QoS
• Support Green Ethernet technology to implement power saving
features. (In Low Power Idle mode, up to 61.5% of the power can be
saved.)
• Supports IEEE 802.3x flow control for full-duplex mode and
backpressure for half-duplex mode
• Non-blocking switching architecture that forwards and filters
packets at full wire-speed for maximum throughput
• 8K entry MAC address table of the DX-GB5PRT with auto-learning
and auto-aging
• Supports for Jumbo frames of up to 15 KB
• LED indicators for monitoring power, link, and activity
Components
Front panel
Power LED
Back panel
V1
FINAL
FOR PRINT
LEDs 1-5
Ports 1-5 Power port
Installing the switch
1 Connect the power adapter to the switch and power outlet.
Power cord
Power
Switch
outlet
2 Connect the PC(s) and other device(s) to the switch.
PC Switch
3 Connect the switch to the Internet.
Internet
Internet Modem Router
4 Install complete connection.
Internet
Switch
Router
Modem
LED indicators
When the switch is plugged in and receiving power, the LED indicators
respond as follows:
LED Status Indication
Power On (green) Power on
Off No device is connected to the corresponding port.
On (orange) A 10/100 Mbps device is connected to the corresponding port.
Link/Act Flashing (orange) A 10/100 Mbps device is transmitting or receiving data
Ports 1-5 through the corresponding port.
On (green) A 1000Mbps device is connected to the corresponding port.
A 1000Mbps device is transmitting or receiving data through
Flashing (green)
the corresponding port.
Network
storage
Switch
Network
storage
PC