Dynex DX-E401 User Manual page 34

34
Field
Remote Remote management allows the router to be configured from the Internet by a
Management Web browser. A username and password are still required to access the Web
management interface. In general, only a member of your network can browse
the built-in Web pages to perform administrator tasks. This feature enables you
to perform administrator tasks from the remote (Internet) host.
IP Address The Internet IP address of the computer that has access to the router. If you input
an asterisk (*) into this field, any computer can access the router. Putting an
asterisk (*) into this field would present a security risk and is not recommended.
Port The port number used to access the router.
Example http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the router
and 8080 is the port used for the Web management interface.
C
ONFIGURING THE SYSTEM TIME
The system time is the time used by the router for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If an
NTP server is set, you will only need to set the time zone. If you manually set the
time, you may also set Daylight Saving dates and the system time will
automatically adjust on those dates.
To configure the system time:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
2 Click the
Description
tab, then the button. The Time screen opens.
Tools Time
Configuring the router