Dynex DX-E401 User Manual page 47

Configuring your computers
5 Enter a
Computer Description
Name your computer screen opens.
6 Enter a
Workgroup name
settings screen opens.
7 When you are ready to apply the network changes, click
then wait while the Wizard configures your computer.
8 On the next screen, click the option that applies to your situation, then
follow the on-screen prompts.
9 When the Network Setup Wizard is done, click
process. You will be prompted to restart your computer.
10 For the new settings to take effect, click
Naming your computer
This section describes how to name your computer using Microsoft Windows XP.
To name your computer:
1 From the Windows Desktop, click
and a , then click
Computer Name
, then click . The Ready to apply network
Next
to complete the
Finish
to restart your computer.
Yes
, then right-click
Start
47
. The
Next
to continue,
Next
.
My Computer