Dynex DX-E401 User Manual page 27

Configuring the router
3 Click
IP Filters
4 Enter the following settings, as appropriate:
Field
IP The IP address of the LAN computer that will be denied access to the Internet.
Port The single port or port range that will be denied access to the Internet.
Protocol Type The protocol type for the selected filter.
Schedule The days and times when the IP filter will be enabled.
C URL
ONFIGURING
URL blocking is used to deny LAN computers access to specific Web sites by the
URL. A URL is a specially formatted text string that defines a location on the
Internet. If any part of the URL contains the blocked word, the site will not be
accessible and the Web page will not display.
To block a text string:
1 Enter the text string to be blocked, then click
appears in the list.
2 To delete the text, highlight it and click
To configure URL blocking:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
2 Click the
, then click .
Enabled
Description
BLOCKING
tab, then the
Advanced Filters
. The text to be blocked
Apply
.
Delete
button. The Filters screen opens.
27