Dynex DX-E401 User Manual page 41

Configuring the router
To review device information:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
2 Click the
screen opens.
If your WAN connection is set up for a dynamic IP address, a
and a
Renew
ISP and click
If your WAN connection is set up for PPPoE, a
Disconnect
connection and click
Field
Firmware Version The firmware version installed in the router.
LAN IP Address: LAN/private IP address of the router
Subnet Mask: LAN/private subnet mask of the DX-401
WAN IP Address: WAN/public IP address
Subnet Mask: WAN/public subnet mask
Gateway: WAN/public gateway IP address
Domain Name Server: WAN/public DNS IP address
WAN Status: WAN connection status
tab, then the
Status Device Info
button are available. Click
to reconnect to your ISP.
Renew
button are available. Click
to reestablish the PPPoE connection.
Connect
Description
button. The Device Information
Release
to disconnect from your
Release
button and a
Connect
to drop the PPPoE
Disconnect
41
button