Dynex DX-E401 User Manual page 28

28
3 Click
URL Blocking
4 Enter the following, as appropriate:
Field
Keywords This setting blocks URLs which contain keywords you enter.
C MAC
ONFIGURING
Use MAC filters to allow or deny LAN computers access to the network, based on
their MAC addresses. You can either manually add a MAC address or select the
MAC address from the list of clients that are currently connected to the broadband
router.
To configure MAC filtering:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
2 Click the
3 Click
MAC Filters
• Disable MAC filters
• Only allow computers with MAC addresses listed below to access the
network
• Only deny computers with MAC addresses listed below to access the
network
, then click
Enabled
Description
FILTERS
tab, then the
Advanced Filters
, then click one of the following:
Configuring the router
.
button. The Filters screen opens.