Specifications - Dynex DX-E401 User Manual

Specifications

Confirm your computer's IP configuration
U IPCONFIG (
SING
To use IPCONFIG:
1 From the Windows Desktop, click
screen), click
opens.
2 Type
IPCONFIG
Your computer' s IP information will appear on the screen.
O
BTAINING A DYNAMIC
Residential gateways and broadband routers will automatically assign IP
addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology. If you are using a DHCP-capable gateway or
router you will not need to assign static IP addresses. For more information, see
Selecting a dynamic IP address in Windows XP or Windows 2000 on page 53.
A
SSIGNING A STATIC
If you are not using a DHCP-capable gateway or router, you will need to assign a
static IP address to your computer. For more information, see Assigning a static IP
address in Windows XP and Windows 2000 on page 51.
Specifications
Standards
VPN pass-through/
multi-sessions
Device management Web-based—Internet Explorer 6 or later, Netscape
Media access control CMSA/CA with ACK
LEDs
W XP
FOR INDOWS AND
Start
then type in the box. The Command Prompt screen
Run, cmd
at the command prompt, the press
IP
ADDRESS
IP
ADDRESS
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3 Auto Negotiation
PPTP
L2TP
IPSec
Navigator 6 or later, or other Java-enabled browsers.
Power
WAN
LAN (10/100)
W 2000)
INDOWS
(in the lower left corner of your
.
Enter
57