What To Do If - Electrolux EOB3400EAX User Manual

20 www.electrolux.com
Installing the door and the glass panel

10. WHAT TO DO IF...

WARNING!
Refer to "Safety information"
chapter.
The oven does not heat
up.
The oven does not heat
up.
90°
2
1
Problem
6. Turn the two fasteners by 90° and re-
move them from their seats.
7. Carefully lift (step 1) and remove (step
2) the glass panel.
8. Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is completed, install
the glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal
glass panel in the seats correctly. Refer to
the illustration.
Possible cause
The appliance is deacti-
vated.
The clock is not set.
Remedy
Activate the appliance.
Set the clock.