Space Tool; Order Tool - Canon Studio Solution User Manual

 Right: Aligns objects by their right edges
 Top: Aligns objects by their top edge
 Middle: Aligns objects by their middles
 Bottom: Aligns objects by their bottom edges

Space Tool

Use the Space tool to evenly space three or more selected objects. You can set
spacing from the object edges or from the object centers.
 Gaps Horizontally: Equally
the page.
 Gaps Vertically: Equally spaces the gaps between objects lined vertically on the
page
 Centers Horizontally: Equally spaces objects from their centers. Use with objects
lined horizontally on the page.
 Centers Vertically: Equally spaces objects from their centers. Use with objects
lined vertically on the page.

Order Tool

You can change the layer order of a selected object. As you add objects to the page,
they are layered one on top of another. The back, or bottom, layer is covered by new
layers. The front, or top, layer covers all previous layers. To achieve the look you want,
you might need to rearrange the order in which objects appear on the page. You can
use the Order tool on only one selected object at a time.
 Send to Back: Sends the selected object to the bottom of the layer stack. The
object becomes the first item in the Border Items list.
 Bring to Front: Sends the selected object to the top of the layer stack. The object
becomes the last item in the Border Items list.
 Send Backward: Sends the selected object one layer toward the bottom of the
layer stack. The object moves closer to the first item in the Border Items list.
 Bring Forward: Sends the selected object one layer toward the top of the layer
stack. The object moves closer to the last item in the Border Items list.
paces the gaps between objects lined horizontally on
S
294
Tutorial: Border Workshop