Setting Up A Canon Printer With Direct Connectivity - Canon Studio Solution User Manual

Setting Up a Canon Printer with Direct Connectivity

Some Canon printers have direct connectivity with the software. You'll only need to
plug it in, turn it on, and attach it to the computer. The software will instantly recognize it
and set it up, no drivers are necessary, when connected directly via USB.
The following Canon printers support direct connectivity:
 Pixma Pro 9000, 9500 Mark I and II
To add and set up a Canon printer with direct connectivity via USB:
1. Attach the printer to the computer.
2. The printer will be automatically detected and added to the Canon printers list. If
it is not automatically detected, select [Add Canon Printer] and select your
printer from the list.
3. Select [Setup] to the right of the printer. A window appears.
4. There are four tabs of options: Main, Roll-sizes, Sheet-sizes, and Margin Text.
a. Main:
i. Select Enable this printer to activate the printer. This is turned on by
ii. Select a Paper Source, Roll Width, Media Type, Media Rule, and
iii. Select Advanced Printing Preferences for the Windows printing
b. Roll-sizes:
i. Select New to add a new roll-size. Select width, arrangements,
ii. Select a roll-size and select Edit to modify an existing roll-size. Edit
iii. Select Reset List to set the list to printer defaults.
iv. Select Delete to delete a roll-size.
c. Sheet-sizes:
i. Select a sheet-size and select Edit to modify an existing sheet setup.
default.
whether to auto-cut and allow borderless printing.
preferences.
color profile, and offsets.
width, arrangements, color profile, and offsets.
Select width, height, media, arrangements, and a color profile.
 IPF 5100, 6100, 6200, 8100, 9100
56
Setting Up: Your Network